Switch Cisco Catalyst C9200L-24P-4G-E
30.560.000 ₫
| Thương Hiệu |
CISCO |
|---|---|
| Bảo hành |
12 tháng |
| Switch Managed |
Layer 3 |
| Switch PoE |
370W |
Switch Cisco Catalyst C9200L-24P-4G-E
Switch Cisco C9200L-24P-4G-E Catalyst 9200L 24 Port 10/100/1000 PoE+ 370W, 4x1G uplink, Network Essentials. Thiết bị chuyển mạch Layer 3 có 24 cổng 1G RJ45 PoE+, 4 cổng Uplink 1G, các tính năng tiên tiến và khả năng mở rộng, C9200L-24P-4G-E là một giải pháp chuyển mạch có thể stacking hiệu quả cho các doanh nghiệp vừa và nhỏ
- 2GB DRAM, 4GB Flash, 2GB DRAM, 4GB Flash
- 56 Gbps Switching Capacity , 41.66 Mbps Forwarding rate
|
Description |
Specifications |
| Performance | |
|
Switching capacity |
56 Gbps |
|
Forwarding rate |
41.66 Mpps |
|
Virtual Networks |
1 |
|
Stacking bandwidth |
80 Gbps |
|
Total number of MAC addresses |
16,000 |
|
Total number of IPv4 routes (ARP plus learned routes) |
11,000 (8,000 direct routes and 3,000 indirect routes) |
|
IPv4 routing entries |
3,000 |
|
IPv6 routing entries |
1,500 |
|
Multicast routing scale |
1,000 |
|
QoS scale entries |
1,000 |
|
ACL scale entries |
1,500 |
|
Packet buffer per SKU |
6 MB buffers |
|
Flexible NetFlow (FNF) entries |
16,000 flows |
|
DRAM |
2 GB |
|
Flash |
4 GB |
|
VLAN IDs |
1024 |
|
Total Switched Virtual Interfaces (SVIs) |
512 |
|
Jumbo frames |
9198 bytes |
|
Wireless bandwidth per switch |
N/A |
|
Default primary power supply |
PWR-C5-600WAC |
|
Available PoE power with single primary power supply only |
370W |
|
Optional secondary power supply |
PWR-C5-600WAC |
|
Available PoE power with additional secondary power supply |
740W |
|
Features |
|
| Switch fundamentals | Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder |
| Automation | NETCONF, RESTCONF, YANG, PnP Agent, PnP |
| Telemetry and visibility | Model-driven telemetry, sampled NetFlow, SPAN, RSPAN |
| Security | MACsec-128 |
| Physical Specifications | |
| Chassis Dimensions | 1.73 x 17.5 x 11.3 Inches 4.4 x 44.5 x 28.8 Centimeters |
| weight | 10.38 Pounds 4.71 Kilograms |
| Mean time between failures (hours) | 392,210 |
| Connectors | |
| Connectors and cabling |
- 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
- 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
- 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
- Cisco StackWise-80 stacking ports: copper-based Cisco StackWise cabling
- Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling
- Management console port: RJ-45-to-DB9 cable for PC connections,USB-C adaptor, USB adaptor
|
| Power connectors |
Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
|
| Standards, Safety and compliance information | |
| Standards |
EEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification RMON I and II standards SNMPv1, v2c, and v3 |
| Safety certifications |
- IEC 60950-1
- UL 60950-1
- CAN/CSA C22.2 No. 60950-1
- EN 60950-1
- AS/NZS 60950.1
- Class I Equipment
|
| Electromagnetic emissions certifications |
- 47 CFR Part 15
- CISPR 22 Class A
- CISPR 32 Class A
- CNS 13438
- EN 300 386
- EN 55022 Class A
- EN 55032 Class A
- EN61000-3-2
- EN61000-3-3
- ICES-003 Class A
- KN 32
- TCVN 7189 Class A
- V-3 Class A
- CISPR 24
- EN 300 386
- EN 55024
- KN 35
- TCVN 7317
|
| Environmental |
Reduction of Hazardous Substances (ROHS) 5
|
